|
|
| Re: Need Help Nightma12 [message #186487 is a reply to message #186446] |
Sat, 21 January 2006 05:42   |
=HT=T-Bird
Messages: 712
Registered: June 2005
Karma: 0
|
Colonel |
|
|
The bot is ready...try typing !gi into IRC...
HTT-Bird (IRC)
HTTBird (WOL)
Proud HazTeam Lieutenant.
BlackIntel Coder & Moderator.
If you have trouble running BIATCH on your FDS, have some questions about a BIATCH message or log entry, or think that BIATCH spit out a false positive, PLEASE contact the BlackIntel coding team and avoid wasting the time of others.
|
|
|
|
|
|
| Re: Need Help Nightma12 [message #186632 is a reply to message #186446] |
Sun, 22 January 2006 13:24 |
EA-DamageEverything
Messages: 423
Registered: January 2005
Location: Germany
Karma: 0
|
Commander |
|
|
To get NR collecting Datas from the FDS, copy the server.ini into the folder <NRdir>\Logs\FDS\renlog
To get NR running with SS-CP1.3 and SSAOW 1.34, change the following in your server2.ini=
FDSLogRoot=renlog
Enable_Gamelog=0
Finally sometimes RG is needed. So DL RG SSC 1.02 and extract it into your RenegadeFDS folder. It creates a folder "renguard_SSC" then.
Go there and open the file renguard.cfg and edit it. You can see my config here for example (you MUST take your OWN paths)=
# Path to svrcfg_cnc.ini
FDSConfigFile = C:\Programme\RenegadeFDS\Server\Data\svrcfg_cnc.ini
# Path to Main Server Dir, do not forget trailing slash.
FDSLogFilePath = C:\Programme\NightRegulator\Logs\FDS\RenLog\
-don't forget the Slash at the end-
I got it this way and it's working fine. If you like, you can enable all killmessages, vehicleCreates etc... I never experienced any crashes with those settings.
By the way, set up IRC and be happy! Don't forget to allow NR full access to the internet in case of using a firewall...
|
|
|
|
| Re: Need Help Nightma12 [message #186646 is a reply to message #186632] |
Sun, 22 January 2006 15:28 |
 |
Nightma12
Messages: 2593
Registered: August 2003
Karma: 0
|
General (2 Stars)
Category Moderator |
|
|
| EA-DamageEverything wrote on Sun, 22 January 2006 14:24 |
To get NR collecting Datas from the FDS, copy the server.ini into the folder <NRdir>\Logs\FDS\renlog
To get NR running with SS-CP1.3 and SSAOW 1.34, change the following in your server2.ini=
FDSLogRoot=renlog
Enable_Gamelog=0
Finally sometimes RG is needed. So DL RG SSC 1.02 and extract it into your RenegadeFDS folder. It creates a folder "renguard_SSC" then.
Go there and open the file renguard.cfg and edit it. You can see my config here for example (you MUST take your OWN paths)=
# Path to svrcfg_cnc.ini
FDSConfigFile = C:\Programme\RenegadeFDS\Server\Data\svrcfg_cnc.ini
# Path to Main Server Dir, do not forget trailing slash.
FDSLogFilePath = C:\Programme\NightRegulator\Logs\FDS\RenLog\
-don't forget the Slash at the end-
I got it this way and it's working fine. If you like, you can enable all killmessages, vehicleCreates etc... I never experienced any crashes with those settings.
By the way, set up IRC and be happy! Don't forget to allow NR full access to the internet in case of using a firewall...
|
what version of NR are you running? alot of the stuff u mentioned isnt needed at all, lol
the server.ini copy + pasteing is over if u want to run the RG SSC
settings FDSLogRoot=renlog would make NR bitch wen u try to make it connect to FDS and it would edit the file itself to fix it
hes problem is a renrem problem, else it wouldnt be able to get that far, lol
Sbh: could you post a picture of your FDS Settings Tab + Your Main tab once yourve hit FDS Connect and had all that text come up?
also make sure the FDS IS ACCUALLY RUNNING! 
|
|
|
|
| Re: Need Help Nightma12 [message #186705 is a reply to message #186646] |
Mon, 23 January 2006 01:09 |
EA-DamageEverything
Messages: 423
Registered: January 2005
Location: Germany
Karma: 0
|
Commander |
|
|
| Nightma12 wrote on Sun, 22 January 2006 23:28 |
what version of NR are you running? alot of the stuff u mentioned isnt needed at all, lol
the server.ini copy + pasteing is over if u want to run the RG SSC
settings FDSLogRoot=renlog would make NR bitch wen u try to make it connect to FDS and it would edit the file itself to fix it
|
I'm running 0.21 and it wasn't that much I have posted.  Just a few settings and your Bot understands the normal SSAOW (you posted on the aohost forums it wouldn't work and needs another SSAOW!) instead of the worse SSAOW-Snipermod which can be DLed at aohost.co.uk. No offense, but there are some newer and better Snipermods available.
OK, I can remove the copied server.ini from the renlog folder without having any issues? But then tell me plz why you haven't removed this from the Bot=
My experience was that only with renlog + disabled gamelog, the killmsg's, createmsg's etc are working. The FDS is showing them in the console (SSAOW just works even without a Bot -didn't know before) and NR grabs the information right away from it without bitching up. All of what NR is showing up can be transmitted to the IRC channel. So for me that is the easy way to get the better Bot running with the FDS and SSAOW 1.34. SSAOW 1.4 is already on my HDD, but I didn't test it yet.
EDIT= When has NR 2.00 arrived it's final status and will going out to public?
[Updated on: Mon, 23 January 2006 01:10] Report message to a moderator |
|
|
|
|
|
| Re: Need Help Nightma12 [message #187105 is a reply to message #186446] |
Wed, 25 January 2006 10:58 |
EA-DamageEverything
Messages: 423
Registered: January 2005
Location: Germany
Karma: 0
|
Commander |
|
|
I'm working with SSAOW 1.34 -this doewsn't have the ssaow.ini. But hey thx for posting this, I also have 1.4. To make it short, I can only enable SSAOW in the NR Controls if I have the 1.4 becaus of the ssaow.ini? Would be xplaining itself why I couldn't turn it on. 
Ah, and= Do you mean NR 0.21 when u say 2.0/2.1? Didn't get that right. I thought you'll releasie 2.00 soon for example.
|
|
|
|
|
|
Search
Help
Members
Register
Login
Home
so i released 2.1 which patched up NR and allowed NR to work with 1.4
