Home » General Discussions » General Discussion » Really Bad ATI 9800 pro probs
| Really Bad ATI 9800 pro probs [message #178676] |
Thu, 10 November 2005 12:55  |
 |
TheGunrun
Messages: 801
Registered: April 2003
Location: nj
Karma: 0
|
Colonel |
|
|
I have a Radeon 9800 pro, running on a Pentium 4, when i first built this system, i had to drop my agp down to 4x in order to prevent games from freezing. Later when the newest Catalyst came out I installed and upped it back to 8x and it worked fine until one day i started getting the random blocks of colors and lines and all sorts of trash across the screen, making gameplay look like a disco scene. I updated the drivers once more and it fixed that problem but shortly went to the polygonal distortion where models in games seemed to get pulled randomly across the maps, consatntly flickering. I pulled the card out and gave it a nice cleaning as it was a bit dusty…i rebooted and played again…all was fine until 30 minutes into the game the polygons came back to haunt me. setting the agp back to 4x didnt help this time, and new and old drivers did nothing.
I came to the conclusion that it may be overheating…i have no clue yet…I also had not watched a movie in some time since the problem and when i loade dup a movie in windvd5 the movie would be blocky and stutter…If the computer sits off for a period of time and you reboot it and play a game, movie or even friggin browsing the web it will be fine for about 30 minutes then back to polygonal/disco distortion…my best guess is a overheating issue, although my temps are correct and I have my case open with a fan blowing right into it…my solution as of now is a hammer and cement slab.
Note: this is my second ati 9800 pro, my first one had the same exact issues (but this was due to over heating) and i sent it back in for this one. Since i got this one iv had a fan blowing into it when ever running games. I really dont want to send it back in. (took me 2 weeks to get it back)
Proud Creator of "Zero Hour Retarded" as seen on http://www.cncden.com and http://www.cnc-files.com
And Proud Creator of "C&C Retarded" http://www.cncRetarded.com
|
|
|
|
| Re: Really Bad ATI 9800 pro probs [message #178679 is a reply to message #178676] |
Thu, 10 November 2005 13:28  |
God of Death
Messages: 59
Registered: January 2005
Location: Omnipresent
Karma: 0
|
Recruit |
|
|
Okay, my 9800Pro is just as bad man, I understand your pain. I can't even play Half-Life 2 or BF2 without mine crashing. I don't think mine is overheating. I can play Renegade fine, but anything that takes some actually graphic power will freeze and die.
I have a fan blowing on it and a PCI exhaust fan right up next to it.
I have not sent it to ATI yet, but I have been looking online for a solution or at least the root of the problem and have come up with nil. If you find an answer do share it, as I am growing tired of this problem.
EDIT: My 9800Pro is running on a AMD 64Bit 3500+.
You can call me God
[Updated on: Thu, 10 November 2005 13:30] Report message to a moderator |
|
|
|
|
|
|
|
|
|
| Re: Really Bad ATI 9800 pro probs [message #178693 is a reply to message #178676] |
Thu, 10 November 2005 14:28 |
icedog90
Messages: 3483
Registered: April 2003
Karma: 0
|
General (3 Stars) |
|
|
The things you are experiencing are called artifacts, which usually happen by overheating or overclocking (not saying you did overclock). I'd send it back to them one more time, and if it still does it, smash it to bits and buy an nVIDIA card (like a Geforce 6800).
EDIT: What is the temperature of the video card when it's idle and under load?
[Updated on: Thu, 10 November 2005 14:30] Report message to a moderator |
|
|
|
|
|
| Re: Really Bad ATI 9800 pro probs [message #178703 is a reply to message #178676] |
Thu, 10 November 2005 16:14 |
 |
DrasticDR
Messages: 439
Registered: February 2003
Location: UK, England
Karma: 0
|
Commander |
|
|
| Quote: |
A FIX THAT WORKED FOR ME AND A BUNCH OF OTHER PEOPLE!! READ ON!
Here we go folks, I've been having this problem for almost a year now with my computer (infinite loop and ati2dvag.dll reboot errors), and tried almost everything my mind could possible think of doing. I've tried every solution on this board, and every other board I could find relating to this file and to the infinite loop, with absolutely no success. I tried every driver package available, bios updates, agp chipset updates, every combination of every setting. I've tried reducing power usage in my computer, I've placed more power in my computer... I've added more fans and created an optimal cooling system in my computer. I made sure there were absolutely no IRQ conflicts, and nothing was using the same IRQ as my video card. I've tried with one stick of ram, with one in 1 and 3. I've tried disabling onboard sound, and putting in a soundblaster card. Nothing... I mean nothing, worked at all.
Until now! I found a solution, that has worked for me and a bunch of other people who have tested it for me.
So give it a try, perhaps it will work for you too. My computer has been working 100% since I made this change. There is a chance it could reduce the effeciency of your texture drawing with your video card... but I've tested it with :
Unreal Tournament 2004
Rise Of Nations
Neverwinter Nights
Doom 3
Max Payne 2
Transport Giant
and a bunch of older games....
Anyhow, no more wait, give this a shot :
Right click-mouse over My Computer
Properties
Hardware(Tab)
Device Manager(button)
Click [+] next to System devices
right-mouse on CPU to AGP Controller (or whatever your controller is called, mine was SiS AGP)
Update Driver(button)
Select Install from a list or specific location (Advanced)
Next(button)
Select Don't search. I will choose the driver to install.
Next(button)
Select PCI standard PCI-to-PCI bridge
Next(button)
Finish(button)
Reboot.
Please let me know how this works for you.
Good luck.
|
It sounds like you had the problem I had for over a year. My games would have artifacts and generally looked like crap with polygons "stretching" across the screen. The only difference is that my games would soon freeze with the sound looping.
Mine too was doing this because of overheating but I found this fix. My card has been fine ever sine, with no artifacts or signs of overheating.
http://www.techspot.com/vb/topic15393.html
[Updated on: Thu, 10 November 2005 16:14] Report message to a moderator |
|
|
|
| Re: Really Bad ATI 9800 pro probs [message #178705 is a reply to message #178695] |
Thu, 10 November 2005 16:42 |
icedog90
Messages: 3483
Registered: April 2003
Karma: 0
|
General (3 Stars) |
|
|
| Renx wrote on Thu, 10 November 2005 13:34 |
If it's idling above 60C, and going over 80C easily while under load, then that's the problem.
If that's the case you could try taking off the heatsink and applying some thermal gel. Make sure you don't damage the card while doing this though, as the warranty won't cover physical damage.
|
To give an example of how it should be, mine idles at 46C (except I haven't checked the temperature while it's under load yet).
|
|
|
|
| Re: Really Bad ATI 9800 pro probs [message #178709 is a reply to message #178676] |
Thu, 10 November 2005 17:03 |
 |
NukeIt15
Messages: 987
Registered: February 2003
Location: Out to lunch
Karma: 0
|
Colonel |
|
|
Well, I can relate from experience...I didn't find out what was happening until I dis-assembled my desktop before coming down here for college. Turns out that the fan got jammed by dust- a problem I did not make note of during routine cleaning, since the dust that jammed the fan was packed in around the drive shaft- where it is not immediately visible. I actually had to pop the fan head off and wipe the gunk out with a q-tip, because it was too tightly packed for the vacuum.
Basically, don't think that there isn't a blockage just because you can't see one.
"Arms discourage and keep the invader and plunderer in awe, and preserve order in the world as well as property. Horrid mischief would ensue were (the law-abiding) deprived of the use of them." - Thomas Paine
Remember, kids: illiteracy is cool. If you took the time to read this, you are clearly a loser who will never get laid. You've been warned.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: Really Bad ATI 9800 pro probs [message #179229 is a reply to message #178676] |
Tue, 15 November 2005 01:38 |
mision08
Messages: 525
Registered: May 2005
Location: Cattle Drive, Dallas to F...
Karma: 0
|
Colonel |
|
|
You know what to do. Send that piece back, get your money back and buy an nVidia card. I purchased the 9700 pro about 3 years ago, it cost me a fortune, and I don't like it. I don't have the same problems you are having though. I only have a FPS issue in large games, like 1 or 2 FPS when im in a pinch.
The drivers from ATI suck. The catalyst from ATI sucks. The drivers from ATI suck. The tech support sucks. Of course, the drivers suck. You have to download a tool to remove the leach ass drivers, just to install more lame ass drivers. I love the smartkeys that are included, they are absolutely useless.
That being said, it has one of the best pictures I have ever seen on a computer, and if I were going to watch a movie, I would prefer it over my 6600 GT. But I have a TV for watching movies. So give me the 6600 anyday. It was less than half the cost, and is more useful to me.
Try removing the drivers you have with the tool from ATI and use the cleaning utility from http://www.rage3d.com/ Install the drivers from the disk unless you have a better one than that. Disable onboard audio and onboard video, Check your power supply, remove all but one dimm. Lower your video quality and resolution, If this fails, move the module to a different slot. If it fails again, toss that one to the side and use the other module. Assuming you have another one. If this fails, hammer and rock.
True Greatness, and just a good human
The best finish, closest finish in the 50 year history of Winston Cup
Freddy Krueger music video
Harvester Of Sorrow, language of the mad
Johnny Cash & Bob Dylan A Thousand Miles Behind
Your own personal Jesus, someone to hear your prayers
Kyle's mom is a bitch
Johnny Cash Live @ San Quentin
Don't Y'all Think This Outlaw Bit's Done Got Out Of Hand?
[Updated on: Tue, 15 November 2005 02:10] Report message to a moderator |
|
|
|
| Re: Really Bad ATI 9800 pro probs [message #179290 is a reply to message #179229] |
Tue, 15 November 2005 15:30 |
icedog90
Messages: 3483
Registered: April 2003
Karma: 0
|
General (3 Stars) |
|
|
| mision08 wrote on Tue, 15 November 2005 00:38 |
The drivers from ATI suck. The catalyst from ATI sucks. The drivers from ATI suck. The tech support sucks. Of course, the drivers suck. You have to download a tool to remove the leach ass drivers, just to install more lame ass drivers. I love the smartkeys that are included, they are absolutely useless.
|
WELL SAID.
|
|
|
|
|
|
|
|
| Re: Really Bad ATI 9800 pro probs [message #189975 is a reply to message #178676] |
Tue, 14 February 2006 17:59 |
 |
SuperFlyingEngi
Messages: 1756
Registered: November 2003
Karma: 0
|
General (1 Star) |
|
|
Well, I think my card just had the same problem. Yesterday, my computer wouldn't load the monitor properly, and when it finally did after several restarts, I got a message from Windows saying my recent problems were probably caused by a Radeon 9800 Pro.
And now today, after idling (no games or anything) after a bit of internet surfing, I come down to the smell of burning computer. Of course, the computer was also offline. I plucked the Radeon out, and it's hard to detect any evidence of burning, but after the smell was pretty much gone it still lingered right above the chipset on the Radeon 9800 after I had pulled it out of the case.
So, does Radeon have any sort of warranty policy on this? (My card is definitely more than a year old.)
Oh, and it's not bad to inhale that smell of burning computer, is it?
(P.S. - sorry for bumping an old topic, but I thought it would be better than making a new topic for this same thing.)
"To announce that there must be no criticism of the President, or that we are to stand by the President, right or wrong, is not only unpatriotic and servile, but is morally treasonable to the American public." -- Theodore Roosevelt (1918)
"The danger to political dissent is acute where the Government attempts to act under so vague a concept as the power to protect "domestic security." Given the difficulty of defining the domestic security interest, the danger of abuse in acting to protect that interest becomes apparent. --U.S. Supreme Court decision (407 U.S. 297 (1972)
The Liberal Media At Work
An objective look at media partisanship
|
|
|
|
|
|
|
|
| Re: Really Bad ATI 9800 pro probs [message #190000 is a reply to message #189975] |
Tue, 14 February 2006 20:35 |
 |
rm5248
Messages: 1156
Registered: November 2003
Location: USA
Karma: 0
|
General (1 Star) |
|
|
| SuperFlyingEngi wrote on Tue, 14 February 2006 18:59 |
Oh, and it's not bad to inhale that smell of burning computer, is it?
|
Computer = circuit board.
Circuit board = solder.
Solder = lead.
Lead = BAD.
Probably not a good idea.
w00t?
|
|
|
|
| Re: Really Bad ATI 9800 pro probs [message #190003 is a reply to message #178676] |
Tue, 14 February 2006 21:25 |
genetix
Messages: 392
Registered: July 2003
Location: Saskatchewan Canada
Karma: 0
|
Commander |
|
|
I have the same video card and when I bought it the salesman(good friend of mine) said that the fan WOULD need replacing. He says its really easy to do and really cheap to. You just have to replace the little motor on the fan once a year because it wears out. I really have to watch for this because I currently have my card in a server thats running 24/7.
Puzzle - Petals Around the Rose
|
|
|
|
| Re: Really Bad ATI 9800 pro probs [message #190055 is a reply to message #190000] |
Wed, 15 February 2006 05:31 |
|
SuperFlyingEngi
Messages: 1756
Registered: November 2003
Karma: 0
|
General (1 Star) |
|
|
| rm5248 wrote on Tue, 14 February 2006 22:35 |
| SuperFlyingEngi wrote on Tue, 14 February 2006 18:59 |
Oh, and it's not bad to inhale that smell of burning computer, is it?
|
Computer = circuit board.
Circuit board = solder.
Solder = lead.
Lead = BAD.
Probably not a good idea.
|
It smelled plasticy, not metally. Not that I'm suggesting sniffing burning circuits is good, but the solder definitely wasn't burning/evaporating as a gas.
So, anybody know what to do about my problem? Since it looks like my warranty has run out, right now I'm pretty much on the level of "throw it away and buy a new card."
"To announce that there must be no criticism of the President, or that we are to stand by the President, right or wrong, is not only unpatriotic and servile, but is morally treasonable to the American public." -- Theodore Roosevelt (1918)
"The danger to political dissent is acute where the Government attempts to act under so vague a concept as the power to protect "domestic security." Given the difficulty of defining the domestic security interest, the danger of abuse in acting to protect that interest becomes apparent. --U.S. Supreme Court decision (407 U.S. 297 (1972)
The Liberal Media At Work
An objective look at media partisanship
|
|
|
|
Goto Forum:
Current Time: Tue Nov 26 20:13:18 MST 2024
Total time taken to generate the page: 0.01186 seconds
|
Search
Help
Members
Register
Login
Home
